Introduction of hydraulic cylinder oil seal:

The hydraulic oil seal is a component that avoids leakage (internal leakage and leakage) of the working medium and prevents external dirt (such as gas, floating ash, water, etc.) from entering the hydraulic parts and the hydraulic transmission system. Although the hydraulic oil seal is an auxiliary part in hydraulic machinery, the advantages and disadvantages of sealing and sealing equipment are one of the cores that can harm the hydraulic transmission system without any problem. The advantages and disadvantages of hydraulic oil seals have been hampered by the improvement of the characteristics and credible performance of hydraulic components and hydraulic transmission systems, the size of the service period, and the hazards to the high-grade and high-level hydraulic machinery and their participation in economic globalization. The key is that this is one of the key elements of the differences in the quality of night pressure originals in countries around the world. Therefore, the damage caused by the ineffectiveness of some hydraulic oil seals will be ten million times the value of the hydraulic oil seal itself.

Precautions for installing the hydraulic cylinder oil seal:

1 Check the relevant surface layer of the live race, cylinder liner and its installation guide sleeve, cleaned on time, without burrs, without edges.

2 The installation workmanship requires clean, no edges and bevels to ensure that all the way to the sealing material is not easily destroyed during the installation process (refer to the Oerro Enterprise OTH-0002 hydraulic seals commonly used installation props).

3 During installation, the hydraulic pipe fittings and their cylinder liners can be used with a small amount of grease on the surface layer to facilitate installation, but no residual grease is allowed between the plastic thermoplastic polyurethane and the drag seal ring, otherwise the sealing characteristics will be harmed.

4 Whether it is column or vertical installation, the parallelism between the live race and the cylinder liner should be maintained. Excessive reaction force will destroy the seal material.

5 The installation rate is not suitable for too fast, otherwise the sealing material will be damaged.

The above is the introduction of the hydraulic oil seal seal introduced by Xiaobian and the precautions when installing the hydraulic cylinder oil seal. I hope that my friends can better understand.